WebShell - stagenterprise.ext.atdcloud.com

WebShell Manager

Linux Stag-Enterprise-Staging-20-04 5.11.0-1019-aws #20~20.04.1-Ubuntu SMP Tue Sep 21 10:40:39 UTC 2021 x86_64
Apache
Server: 172.31.9.152
Your IP: 216.73.216.236

HOME

Name	Type	Size	Permissions	Modified	Actions
..	Parent	-	drwxr-xr-x	2021-09-27 19:07:36	-
ImageMagick-6	Folder	-	0755	2025-04-17 06:12:48
NetworkManager	Folder	-	0755	2021-01-29 23:27:02
PackageKit	Folder	-	0755	2021-01-29 23:27:52
X11	Folder	-	0755	2021-01-29 23:25:37
acpi	Folder	-	0755	2021-01-29 23:33:56
alternatives	Folder	-	0755	2022-05-27 06:16:59
amazon	Folder	-	0755	2021-08-09 15:02:16
apache2	Folder	-	0755	2026-07-31 03:28:42
apparmor	Folder	-	0755	2024-10-08 06:15:52
apparmor.d	Folder	-	0755	2024-10-08 06:15:52
apport	Folder	-	0755	2025-08-06 06:08:56
apt	Folder	-	0755	2021-01-29 23:24:13
bash_completion.d	Folder	-	0755	2025-08-06 06:08:56
binfmt.d	Folder	-	0755	2020-04-22 09:04:26
byobu	Folder	-	0755	2021-01-29 23:27:19
ca-certificates	Folder	-	0755	2021-01-29 23:24:13
calendar	Folder	-	0755	2021-01-29 23:27:13
cloud	Folder	-	0755	2021-08-09 15:00:02
console-setup	Folder	-	0755	2021-01-29 23:28:02
cron.d	Folder	-	0755	2022-06-08 06:47:29
cron.daily	Folder	-	0755	2025-08-06 06:08:56
cron.hourly	Folder	-	0755	2021-01-29 23:24:20
cron.monthly	Folder	-	0755	2021-01-29 23:24:20
cron.weekly	Folder	-	0755	2021-09-27 17:46:21
cryptsetup-initramfs	Folder	-	0755	2022-02-17 06:29:13
dbconfig-common	Folder	-	0755	2021-08-09 18:12:27
dbus-1	Folder	-	0755	2021-01-29 23:24:14
dconf	Folder	-	0755	2021-01-29 23:25:37
default	Folder	-	0755	2025-08-06 06:08:56
depmod.d	Folder	-	0755	2021-01-29 23:24:21
dhcp	Folder	-	0755	2022-10-07 06:39:34
dpkg	Folder	-	0755	2022-05-27 06:17:06
fonts	Folder	-	0755	2021-08-09 15:01:32
fwupd	Folder	-	0755	2021-08-09 15:04:34
ghostscript	Folder	-	0755	2021-08-09 15:01:17
groff	Folder	-	0755	2021-01-29 23:27:27
grub.d	Folder	-	0755	2021-09-27 17:46:15
gss	Folder	-	0755	2021-01-29 23:25:31
init	Folder	-	0755	2021-08-09 15:02:16
init.d	Folder	-	0755	2025-08-06 06:08:56
initramfs-tools	Folder	-	0755	2021-08-09 14:59:55
iproute2	Folder	-	0755	2021-01-29 23:24:23
iscsi	Folder	-	0755	2023-07-29 06:14:36
kernel	Folder	-	0755	2021-01-29 23:33:33
landscape	Folder	-	0775	2020-04-27 17:34:53
ld.so.conf.d	Folder	-	0755	2025-05-30 06:09:38
ldap	Folder	-	0755	2024-01-31 06:01:28
letsencrypt	Folder	-	0755	2026-07-31 03:28:42
libpaper.d	Folder	-	0755	2019-06-25 22:04:32
lighttpd	Folder	-	0755	2021-08-09 18:04:20
logcheck	Folder	-	0755	2021-01-29 23:26:36
logrotate.d	Folder	-	0755	2025-08-06 06:08:56
lvm	Folder	-	0755	2021-01-29 23:27:51
mdadm	Folder	-	0755	2021-01-29 23:27:18
modprobe.d	Folder	-	0755	2025-05-29 06:23:03
modules-load.d	Folder	-	0755	2023-03-08 06:47:34
multipath	Folder	-	0700	2021-08-09 14:58:40
mysql	Folder	-	0755	2021-08-09 15:01:22
netplan	Folder	-	0755	2021-08-09 14:58:46
network	Folder	-	0755	2021-01-29 23:25:37
networkd-dispatcher	Folder	-	0755	2021-01-29 23:24:18
newt	Folder	-	0755	2021-01-29 23:24:23
opt	Folder	-	0755	2021-01-29 23:23:55
pam.d	Folder	-	0755	2025-05-14 06:10:36
perl	Folder	-	0755	2021-01-29 23:25:30
php	Folder	-	0755	2021-08-09 15:01:11
pki	Folder	-	0755	2021-01-29 23:25:38
pm	Folder	-	0755	2021-01-29 23:25:39
polkit-1	Folder	-	0755	2021-01-29 23:26:37
pollinate	Folder	-	0755	2021-08-09 14:59:58
profile.d	Folder	-	0755	2024-08-02 06:55:47
python3	Folder	-	0755	2021-01-29 23:24:28
python3.8	Folder	-	0755	2025-03-26 06:25:36
rc0.d	Folder	-	0755	2021-08-09 15:01:37
rc1.d	Folder	-	0755	2021-08-09 15:01:37
rc2.d	Folder	-	0755	2021-08-09 15:01:38
rc3.d	Folder	-	0755	2021-08-09 15:01:38
rc4.d	Folder	-	0755	2021-08-09 15:01:38
rc5.d	Folder	-	0755	2021-08-09 15:01:38
rc6.d	Folder	-	0755	2021-08-09 15:01:37
rcS.d	Folder	-	0755	2021-01-29 23:27:51
rsyslog.d	Folder	-	0755	2021-08-09 15:00:02
security	Folder	-	0755	2025-02-26 06:26:05
selinux	Folder	-	0755	2021-01-29 23:24:02
skel	Folder	-	0755	2022-04-22 06:03:04
sos	Folder	-	0755	2022-09-28 06:44:43
ssh	Folder	-	0755	2025-04-26 06:02:38
ssl	Folder	-	0755	2025-02-22 06:15:15
sudoers.d	Folder	-	0750	2023-04-13 06:00:34
sysctl.d	Folder	-	0755	2023-11-16 06:06:46
systemd	Folder	-	0755	2023-03-08 06:47:35
terminfo	Folder	-	0755	2023-05-24 06:43:10
tmpfiles.d	Folder	-	0755	2021-01-29 23:27:22
ubuntu-advantage	Folder	-	0755	2021-08-09 15:04:31
udev	Folder	-	0755	2023-03-08 06:47:45
ufw	Folder	-	0755	2021-01-29 23:27:31
update-manager	Folder	-	0755	2021-09-27 17:46:25
update-motd.d	Folder	-	0755	2021-09-27 17:46:25
update-notifier	Folder	-	0755	2021-01-20 16:46:43
vim	Folder	-	0755	2025-04-09 06:23:11
vmware-tools	Folder	-	0755	2025-05-14 06:10:36
xdg	Folder	-	0755	2021-01-29 23:24:20
.pwd.lock	File	0 B	0600	2021-01-29 23:24:04
adduser.conf	File	2.96 KB	0644	2021-01-29 23:24:07
at.deny	File	144 B	0640	2018-11-12 17:11:53
bash.bashrc	File	2.26 KB	0644	2020-02-25 12:03:22
bash_completion	File	45 B	0644	2020-01-26 03:42:18
bindresvport.blacklist	File	367 B	0644	2020-04-14 19:26:04
ca-certificates.conf	File	7.99 KB	0644	2024-09-27 06:30:41
ca-certificates.conf.dpkg-old	File	7.37 KB	0644	2023-05-25 06:30:39
cczerc	File	4.49 KB	0644	2018-05-03 14:13:58
crontab	File	1.02 KB	0644	2020-02-13 20:44:42
crypttab	File	54 B	0644	2021-01-29 23:25:36
debconf.conf	File	2.9 KB	0644	2019-08-03 10:51:13
debian_version	File	13 B	0644	2019-12-05 14:39:21
deluser.conf	File	604 B	0644	2018-09-15 22:14:19
e2scrub.conf	File	685 B	0644	2020-02-14 06:08:18
ec2_version	File	33 B	0644	2021-01-29 23:28:01
environment	File	106 B	0644	2021-01-29 23:24:59
ethertypes	File	1.77 KB	0644	2019-12-27 00:42:11
fstab	File	183 B	0644	2021-09-27 16:30:19
fstab-bkp	File	51 B	0644	2021-08-09 15:02:08
fuse.conf	File	280 B	0644	2014-06-20 06:23:50
gai.conf	File	2.52 KB	0644	2020-02-01 11:52:50
gitconfig	File	126 B	0644	2021-08-09 15:01:29
group	File	911 B	0644	2021-08-09 15:02:12
group-	File	896 B	0644	2021-08-09 15:02:08
gshadow	File	769 B	0640	2021-08-09 15:02:12
gshadow-	File	757 B	0640	2021-08-09 15:02:08
hdparm.conf	File	4.94 KB	0644	2019-08-21 12:36:14
hibagent-config.cfg	File	1.44 KB	0644	2017-11-20 14:40:16
hibinit-config.cfg	File	743 B	0644	2018-11-12 21:16:03
host.conf	File	92 B	0644	2019-12-05 14:39:21
hostname	File	30 B	0644	2021-09-27 18:51:56
hosts	File	309 B	0644	2021-09-27 18:53:03
hosts.allow	File	411 B	0644	2021-01-29 23:27:11
hosts.deny	File	711 B	0644	2021-01-29 23:27:11
inputrc	File	1.71 KB	0644	2020-02-25 11:48:50
issue	File	26 B	0644	2021-08-04 14:53:58
issue.net	File	19 B	0644	2021-08-04 14:53:58
kernel-img.conf	File	110 B	0644	2021-01-29 23:25:12
ld.so.cache	File	28.67 KB	0644	2025-05-30 06:09:38
ld.so.conf	File	34 B	0644	2020-04-14 19:26:04
legal	File	267 B	0644	2019-12-05 14:39:21
libaudit.conf	File	191 B	0644	2020-02-18 09:42:38
locale.alias	File	2.93 KB	0644	2020-04-14 19:26:04
locale.gen	File	9.22 KB	0644	2025-05-30 06:10:34
localtime	File	118 B	0644	2025-04-22 10:20:10
login.defs	File	10.3 KB	0644	2020-02-07 15:32:06
logrotate.conf	File	533 B	0644	2019-01-21 10:11:39
lsb-release	File	104 B	0644	2021-08-04 14:53:13
ltrace.conf	File	14.52 KB	0644	2019-02-01 00:10:30
machine-id	File	33 B	0444	2021-08-09 14:58:41
magic	File	111 B	0644	2020-01-16 20:39:11
magic.mime	File	111 B	0644	2020-01-16 20:39:11
mailcap	File	3.6 KB	0644	2025-04-09 06:23:11
mailcap.order	File	449 B	0644	2019-10-18 23:05:50
manpath.config	File	5.09 KB	0644	2020-02-25 17:13:45
mime.types	File	23.97 KB	0644	2019-10-18 23:05:50
mke2fs.conf	File	808 B	0644	2020-02-14 06:08:18
modules	File	195 B	0644	2021-01-29 23:24:21
mtab	File	0 B	0444	2026-07-31 12:21:01
multipath.conf	File	41 B	0644	2020-04-06 08:17:20
nanorc	File	9.8 KB	0644	2020-02-07 11:27:28
networks	File	91 B	0644	2019-12-05 14:39:21
nsswitch.conf	File	510 B	0644	2021-01-29 23:24:21
os-release	File	382 B	0644	2021-08-04 14:53:58
overlayroot.conf	File	6.76 KB	0644	2020-02-25 18:08:22
overlayroot.local.conf	File	112 B	0644	2021-01-29 23:28:07
pam.conf	File	552 B	0644	2019-12-17 16:41:40
papersize	File	3 B	0644	2021-08-09 15:01:22
passwd	File	1.84 KB	0644	2021-08-09 15:02:12
passwd-	File	1.78 KB	0644	2021-08-09 14:58:54
popularity-contest.conf	File	0 B	0644	2021-01-29 23:28:04
profile	File	581 B	0644	2019-12-05 14:39:21
protocols	File	2.86 KB	0644	2013-04-01 21:29:14
resolv.conf	File	737 B	0644	2023-03-08 06:47:35
rmt	File	58.55 KB	0755	2023-12-05 05:16:50
rpc	File	887 B	0644	2013-04-01 16:41:40
rsyslog.conf	File	1.35 KB	0644	2020-02-11 15:22:43
screenrc	File	3.58 KB	0644	2016-06-20 00:31:45
services	File	14.13 KB	0644	2020-02-16 23:20:43
shadow	File	984 B	0640	2021-08-09 15:20:11
shadow-	File	984 B	0640	2021-08-09 15:02:12
shells	File	146 B	0644	2021-08-09 14:59:41
subgid	File	20 B	0644	2021-08-09 14:58:49
subgid-	File	0 B	0644	2021-01-29 23:24:04
subuid	File	20 B	0644	2021-08-09 14:58:49
subuid-	File	0 B	0644	2021-01-29 23:24:04
sudoers	File	755 B	0440	2020-02-03 14:32:18
sysctl.conf	File	2.31 KB	0644	2021-09-27 16:30:19
timezone	File	8 B	0644	2025-05-30 06:09:46
ucf.conf	File	1.23 KB	0644	2018-12-14 08:51:14
vtrgb	File	158 B	0644	2020-03-27 10:10:06
wgetrc	File	4.83 KB	0644	2019-07-24 19:40:25
xattr.conf	File	642 B	0644	2019-09-24 02:17:57
zsh_command_not_found	File	477 B	0644	2019-10-07 15:08:21

## Sample initialization file for GNU nano.
##
## This file should not be in DOS or Mac format, and characters
## specially interpreted by the shell should not be escaped here.
##
## To make sure an option is disabled, use "unset <option>".
##
## For the options that take parameters, the default value is given.
## Other options are unset by default.
##
## Inside string parameters, quotes should not be escaped.  The last
## double quote on the line will be seen as the closing quote.

## Make the 'nextword' function (Ctrl+Right) stop at word ends
## instead of at beginnings.
# set afterends

## When soft line wrapping is enabled, make it wrap lines at blanks
## (tabs and spaces) instead of always at the edge of the screen.
# set atblanks

## Automatically indent a newly created line to the same number of
## tabs and/or spaces as the preceding line -- or as the next line
## if the preceding line is the beginning of a paragraph.
# set autoindent

## Back up files to the current filename plus a tilde.
# set backup

## The directory to put unique backup files in.
# set backupdir ""

## Use bold text instead of reverse video text.
# set boldtext

## The characters treated as closing brackets when justifying paragraphs.
## This may not include any blank characters.  Only closing punctuation,
## optionally followed by these closing brackets, can end sentences.
# set brackets ""')>]}"

## Automatically hard-wrap the current line when it becomes overlong.
# set breaklonglines

## Do case-sensitive searches by default.
# set casesensitive

## Constantly display the cursor position in the status bar.  Note that
## this overrides "quickblank".
# set constantshow

## Use cut-from-cursor-to-end-of-line by default.
# set cutfromcursor

## Do not use the line below the title bar, leaving it entirely blank.
# set emptyline

## Set the target width for automatic hard-wrapping and for justifying
## paragraphs.  If the specified value is 0 or less, the wrapping point
## will be the terminal's width minus this number.
# set fill -8

## Remember the used search/replace strings for the next session.
set historylog

## Scroll the buffer contents per half-screen instead of per line.
# set jumpyscrolling

## Display line numbers to the left of the text.
# set linenumbers

## Enable vim-style lock-files.  This is just to let a vim user know you
## are editing a file [s]he is trying to edit and vice versa.  There are
## no plans to implement vim-style undo state in these files.
set locking

## The opening and closing brackets that can be found by bracket
## searches.  They cannot contain blank characters.  The former set must
## come before the latter set, and both must be in the same order.
# set matchbrackets "(<[{)>]}"

## Enable mouse support, if available for your system.  When enabled,
## mouse clicks can be used to place the cursor, set the mark (with a
## double click), and execute shortcuts.  The mouse will work in the X
## Window System, and on the console when gpm is running.
# set mouse

## Switch on multiple file buffers (inserting a file will put it into
## a separate buffer).
# set multibuffer

## Don't convert files from DOS/Mac format.
# set noconvert

## Don't display the helpful shortcut lists at the bottom of the screen.
# set nohelp

## Don't automatically add a newline when a file does not end with one.
# set nonewlines

## Set operating directory.  nano will not read or write files outside
## this directory and its subdirectories.  Also, the current directory
## is changed to here, so any files are inserted from this dir.  A blank
## string means the operating-directory feature is turned off.
# set operatingdir ""

## Remember the cursor position in each file for the next editing session.
# set positionlog

## Preserve the XON and XOFF keys (^Q and ^S).
# set preserve

## The characters treated as closing punctuation when justifying
## paragraphs.  They cannot contain blank characters.  Only closing
## punctuation, optionally followed by closing brackets, can end
## sentences.
# set punct "!.?"

## Do quick status-bar blanking.  Status-bar messages will disappear after
## 1 keystroke instead of 26.  Note that "constantshow" overrides this.
# set quickblank

## The regular expression that matches quoting characters in email
## or line-comment introducers in source code.  The default is:
# set quotestr "^([ 	]*([!#%:;>|}]|//))+"

## Try to work around a mismatching terminfo terminal description.
# set rawsequences

## Fix Backspace/Delete confusion problem.
# set rebinddelete

## Do regular-expression searches by default.
## Regular expressions are of the extended type (ERE).
# set regexp

## Put the cursor on the highlighted item in the file browser, and show
## the cursor in the help viewer; useful for people who use a braille
## display and people with poor vision.
# set showcursor

## Make the Home key smarter.  When Home is pressed anywhere but at the
## very beginning of non-whitespace characters on a line, the cursor
## will jump to that beginning (either forwards or backwards).  If the
## cursor is already at that position, it will jump to the true
## beginning of the line.
# set smarthome

## Enable soft line wrapping (AKA full-line display).
# set softwrap

## Use this spelling checker instead of the internal one.  This option
## does not have a default value.
# set speller "aspell -x -c"

## Allow nano to be suspended.
set suspend

## Use this tab size instead of the default; it must be greater than 0.
# set tabsize 8

## Convert typed tabs to spaces.
# set tabstospaces

## Save automatically on exit; don't prompt.
# set tempfile

## Snip whitespace at the end of lines when justifying or hard-wrapping.
# set trimblanks

## Disallow file modification.  Why would you want this in an rcfile? ;)
# set view

## The two single-column characters used to display the first characters
## of tabs and spaces.  187 in ISO 8859-1 (0000BB in Unicode) and 183 in
## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
## The default when in a UTF-8 locale:
# set whitespace "»·"
## The default otherwise:
# set whitespace ">."

## Detect word boundaries differently by treating punctuation
## characters as parts of words.
# set wordbounds

## The characters (besides alphanumeric ones) that should be considered
## as parts of words.  This option does not have a default value.  When
## set, it overrides option 'set wordbounds'.
# set wordchars "<_>."

## Let an unmodified Backspace or Delete erase the marked region (instead
## of a single character, and without affecting the cutbuffer).
# set zap

## Paint the interface elements of nano.  These are examples;
## by default there are no colors, except for errorcolor.
# set titlecolor brightwhite,blue
# set statuscolor brightwhite,green
# set errorcolor brightwhite,red
# set selectedcolor brightwhite,magenta
# set stripecolor ,yellow
# set numbercolor cyan
# set keycolor cyan
# set functioncolor green
## In root's .nanorc you might want to use:
# set titlecolor brightwhite,magenta
# set statuscolor brightwhite,magenta
# set errorcolor brightwhite,red
# set selectedcolor brightwhite,cyan
# set stripecolor ,yellow
# set numbercolor magenta
# set keycolor brightmagenta
# set functioncolor magenta

## Setup of syntax coloring.
##
##   syntax "name" ["filename regex" ...]
##
##   color|icolor foreground,background "regex" ["regex"...]
##   [...]
##
## 'color' will do case-sensitive matches, while 'icolor' will do
## case-insensitive matches.
##
## All color commands are applied in the order in which they are specified,
## meaning that later commands can recolor stuff that was colored earlier.
##
## Valid color names for foreground and background are: white, black, normal,
## red, blue, green, yellow, magenta, cyan.  For foreground colors, you may
## use the prefix "bright" to get a stronger highlight.
##
## All regexes (regular expressions) are of the extended type (ERE).
##
## If the coloring rule should span multiple lines, use the following format:
##
##   color fg,bg  start="regex" end="regex"
##
## If you wish, you may put your syntax definitions in separate files.
## You can make use of such files as follows:
##
##   include "/path/to/syntax_file.nanorc"

## To include all existing syntax definitions, you can do:
include "/usr/share/nano/*.nanorc"

## If <Tab> should always produce four spaces when editing a Python file,
## independent of the settings of 'tabsize' and 'tabstospaces':
# extendsyntax python tabgives "    "

## If <Tab> should always produce an actual TAB when editing a Makefile:
# extendsyntax makefile tabgives "	"

## Key bindings.
## See nanorc(5) (section REBINDING KEYS) for more details on this.

## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
## the ASCII character for backspace, so it is bound by default to the
## backspace function.  The <Backspace> key itself produces a different
## keycode, which is hard-bound to the backspace function.  So, if you
## normally use <Backspace> for backspacing and not ^H, you can make
## <Ctrl+Backspace> delete the word to the left of the cursor with:
# bind ^H chopwordleft main

## If you would like nano to have keybindings that are more "usual",
## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
## then uncomment these:
#bind ^Q exit all
#bind ^S savefile main
#bind ^W writeout main
#bind ^O insert main
#bind ^H help all
#bind ^H exit help
#bind ^F whereis all
#bind ^G findnext all
#bind ^B wherewas all
#bind ^D findprevious all
#bind ^R replace main
#bind M-X flipnewbuffer all
#bind ^X cut all
#bind ^C copy main
#bind ^V paste all
#bind ^P curpos main
#bind ^A mark main
#unbind ^K main
#unbind ^U all
#unbind ^N main
#unbind ^Y all
#unbind M-J main
#unbind M-T main
#bind ^T gotoline main
#bind ^T gotodir browser
#bind ^Y speller main
#bind M-U undo main
#bind M-R redo main
#bind ^U undo main
#bind ^E redo main
#set multibuffer

WebShell Manager

Command Execution

File Upload

WebShell Manager

Command Execution

File Upload

Create New Folder

Create New File

Edit File: nanorc

Rename

Change Permissions

System Information