WebShell - stagenterprise.ext.atdcloud.com

Name	Type	Size	Permissions	Modified	Actions
..	Parent	-	drwxr-xr-x	2026-07-16 05:15:30	-
__phello__	Folder	-	0755	2026-07-16 05:15:30
__pycache__	Folder	-	0755	2026-07-16 05:15:30
asyncio	Folder	-	0755	2026-07-16 05:15:30
collections	Folder	-	0755	2026-07-16 05:15:30
concurrent	Folder	-	0755	2026-07-16 05:15:30
config-3.12-x86_64-linux-gnu	Folder	-	0755	2026-07-16 05:15:30
ctypes	Folder	-	0755	2026-07-16 05:15:30
curses	Folder	-	0755	2026-07-16 05:15:30
dbm	Folder	-	0755	2026-07-16 05:15:30
email	Folder	-	0755	2026-07-16 05:15:30
encodings	Folder	-	0755	2026-07-16 05:15:30
ensurepip	Folder	-	0755	2026-07-16 05:15:30
html	Folder	-	0755	2026-07-16 05:15:30
http	Folder	-	0755	2026-07-16 05:15:30
importlib	Folder	-	0755	2026-07-16 05:15:30
json	Folder	-	0755	2026-07-16 05:15:30
lib-dynload	Folder	-	0755	2026-07-16 05:15:32
logging	Folder	-	0755	2026-07-16 05:15:30
multiprocessing	Folder	-	0755	2026-07-16 05:15:30
pydoc_data	Folder	-	0755	2026-07-16 05:15:30
re	Folder	-	0755	2026-07-16 05:15:30
sqlite3	Folder	-	0755	2026-07-16 05:15:30
test	Folder	-	0755	2026-07-16 05:15:30
tomllib	Folder	-	0755	2026-07-16 05:15:30
unittest	Folder	-	0755	2026-07-16 05:15:30
urllib	Folder	-	0755	2026-07-16 05:15:30
venv	Folder	-	0755	2026-07-16 05:15:30
wsgiref	Folder	-	0755	2026-07-16 05:15:30
xml	Folder	-	0755	2026-07-16 05:15:30
xmlrpc	Folder	-	0755	2026-07-16 05:15:30
zipfile	Folder	-	0755	2026-07-16 05:15:30
zoneinfo	Folder	-	0755	2026-07-16 05:15:30
EXTERNALLY-MANAGED	File	645 B	0644	2026-06-19 12:46:00
LICENSE.txt	File	13.61 KB	0644	2026-06-19 12:46:00
__future__.py	File	5.1 KB	0644	2026-06-19 12:46:00
__hello__.py	File	227 B	0644	2026-06-19 12:46:00
_aix_support.py	File	3.93 KB	0644	2026-06-19 12:46:00
_collections_abc.py	File	31.33 KB	0644	2026-06-19 12:46:00
_compat_pickle.py	File	8.56 KB	0644	2026-06-19 12:46:00
_compression.py	File	5.55 KB	0644	2026-06-19 12:46:00
_distutils_system_mod.py	File	5.58 KB	0644	2026-06-19 12:46:00
_markupbase.py	File	14.31 KB	0644	2026-06-19 12:46:00
_osx_support.py	File	21.51 KB	0644	2026-06-19 12:46:00
_py_abc.py	File	6.04 KB	0644	2026-06-19 12:46:00
_pydatetime.py	File	89.94 KB	0644	2026-06-19 12:46:00
_pydecimal.py	File	223.85 KB	0644	2026-06-19 12:46:00
_pyio.py	File	91.4 KB	0644	2026-06-19 12:46:00
_pylong.py	File	8.83 KB	0644	2026-06-19 12:46:00
_sitebuiltins.py	File	3.05 KB	0644	2026-06-19 12:46:00
_strptime.py	File	24.04 KB	0644	2026-06-19 12:46:00
_sysconfigdata__linux_x86_64-linux-gnu.py	File	48.34 KB	0644	2026-06-19 12:46:00
_sysconfigdata__x86_64-linux-gnu.py	File	48.34 KB	0644	2026-06-19 12:46:00
_threading_local.py	File	7.05 KB	0644	2026-06-19 12:46:00
_weakrefset.py	File	5.75 KB	0644	2026-06-19 12:46:00
abc.py	File	6.38 KB	0644	2026-06-19 12:46:00
aifc.py	File	33.41 KB	0644	2026-06-19 12:46:00
antigravity.py	File	500 B	0644	2026-06-19 12:46:00
argparse.py	File	99.37 KB	0644	2026-06-19 12:46:00
ast.py	File	62.75 KB	0644	2026-06-19 12:46:00
base64.py	File	20.12 KB	0755	2026-07-16 05:15:22
bdb.py	File	31.7 KB	0644	2026-06-19 12:46:00
bisect.py	File	3.34 KB	0644	2026-06-19 12:46:00
bz2.py	File	11.57 KB	0644	2026-06-19 12:46:00
cProfile.py	File	6.4 KB	0755	2026-07-16 05:15:22
calendar.py	File	24.82 KB	0644	2026-06-19 12:46:00
cgi.py	File	33.61 KB	0755	2026-07-16 05:15:22
cgitb.py	File	12.13 KB	0644	2026-06-19 12:46:00
chunk.py	File	5.37 KB	0644	2026-06-19 12:46:00
cmd.py	File	14.52 KB	0644	2026-06-19 12:46:00
code.py	File	10.44 KB	0644	2026-06-19 12:46:00
codecs.py	File	36.01 KB	0644	2026-06-19 12:46:00
codeop.py	File	5.77 KB	0644	2026-06-19 12:46:00
colorsys.py	File	3.97 KB	0644	2026-06-19 12:46:00
compileall.py	File	20.12 KB	0644	2026-06-19 12:46:00
configparser.py	File	52.53 KB	0644	2026-06-19 12:46:00
contextlib.py	File	26.99 KB	0644	2026-06-19 12:46:00
contextvars.py	File	129 B	0644	2026-06-19 12:46:00
copy.py	File	8.21 KB	0644	2026-06-19 12:46:00
copyreg.py	File	7.44 KB	0644	2026-06-19 12:46:00
crypt.py	File	3.82 KB	0644	2026-06-19 12:46:00
csv.py	File	16 KB	0644	2026-06-19 12:46:00
dataclasses.py	File	60.31 KB	0644	2026-06-19 12:46:00
datetime.py	File	268 B	0644	2026-06-19 12:46:00
decimal.py	File	320 B	0644	2026-06-19 12:46:00
difflib.py	File	81.36 KB	0644	2026-06-19 12:46:00
dis.py	File	29.5 KB	0644	2026-06-19 12:46:00
doctest.py	File	103.98 KB	0644	2026-06-19 12:46:00
enum.py	File	79.72 KB	0644	2026-06-19 12:46:00
filecmp.py	File	9.95 KB	0644	2026-06-19 12:46:00
fileinput.py	File	15.35 KB	0644	2026-06-19 12:46:00
fnmatch.py	File	5.86 KB	0644	2026-06-19 12:46:00
fractions.py	File	37.17 KB	0644	2026-06-19 12:46:00
ftplib.py	File	34.41 KB	0644	2026-06-19 12:46:00
functools.py	File	37.23 KB	0644	2026-06-19 12:46:00
genericpath.py	File	5.44 KB	0644	2026-06-19 12:46:00
getopt.py	File	7.31 KB	0644	2026-06-19 12:46:00
getpass.py	File	5.85 KB	0644	2026-06-19 12:46:00
gettext.py	File	21.24 KB	0644	2026-06-19 12:46:00
glob.py	File	8.53 KB	0644	2026-06-19 12:46:00
graphlib.py	File	9.43 KB	0644	2026-06-19 12:46:00
gzip.py	File	24.28 KB	0644	2026-06-19 12:46:00
hashlib.py	File	9.13 KB	0644	2026-06-19 12:46:00
heapq.py	File	22.48 KB	0644	2026-06-19 12:46:00
hmac.py	File	7.54 KB	0644	2026-06-19 12:46:00
imaplib.py	File	52.43 KB	0644	2026-06-19 12:46:00
imghdr.py	File	4.29 KB	0644	2026-06-19 12:46:00
inspect.py	File	122.48 KB	0644	2026-06-19 12:46:00
io.py	File	3.5 KB	0644	2026-06-19 12:46:00
ipaddress.py	File	76.46 KB	0644	2026-06-19 12:46:00
keyword.py	File	1.05 KB	0644	2026-06-19 12:46:00
linecache.py	File	5.52 KB	0644	2026-06-19 12:46:00
locale.py	File	76.72 KB	0644	2026-06-19 12:46:00
lzma.py	File	12.97 KB	0644	2026-06-19 12:46:00
mailbox.py	File	77.06 KB	0644	2026-06-19 12:46:00
mailcap.py	File	9.11 KB	0644	2026-06-19 12:46:00
mimetypes.py	File	22.35 KB	0644	2026-06-19 12:46:00
modulefinder.py	File	23.14 KB	0644	2026-06-19 12:46:00
netrc.py	File	6.76 KB	0644	2026-06-19 12:46:00
nntplib.py	File	40.12 KB	0644	2026-06-19 12:46:00
ntpath.py	File	29.32 KB	0644	2026-06-19 12:46:00
nturl2path.py	File	2.82 KB	0644	2026-06-19 12:46:00
numbers.py	File	11.2 KB	0644	2026-06-19 12:46:00
opcode.py	File	12.87 KB	0644	2026-06-19 12:46:00
operator.py	File	10.71 KB	0644	2026-06-19 12:46:00
optparse.py	File	58.95 KB	0644	2026-06-19 12:46:00
os.py	File	38.85 KB	0644	2026-06-19 12:46:00
pathlib.py	File	49.95 KB	0644	2026-06-19 12:46:00
pdb.py	File	67.83 KB	0755	2026-07-16 05:15:22
pickle.py	File	63.38 KB	0644	2026-06-19 12:46:00
pickletools.py	File	91.66 KB	0644	2026-06-19 12:46:00
pipes.py	File	8.77 KB	0644	2026-06-19 12:46:00
pkgutil.py	File	17.85 KB	0644	2026-06-19 12:46:00
platform.py	File	42.32 KB	0755	2026-07-16 05:15:22
plistlib.py	File	27.91 KB	0644	2026-06-19 12:46:00
poplib.py	File	13.83 KB	0644	2026-06-19 12:46:00
posixpath.py	File	17.21 KB	0644	2026-06-19 12:46:00
pprint.py	File	23.59 KB	0644	2026-06-19 12:46:00
profile.py	File	22.55 KB	0755	2026-07-16 05:15:22
pstats.py	File	28.6 KB	0644	2026-06-19 12:46:00
pty.py	File	5.99 KB	0644	2026-06-19 12:46:00
py_compile.py	File	7.69 KB	0644	2026-06-19 12:46:00
pyclbr.py	File	11.13 KB	0644	2026-06-19 12:46:00
pydoc.py	File	110.44 KB	0755	2026-07-16 05:15:22
queue.py	File	11.23 KB	0644	2026-06-19 12:46:00
quopri.py	File	7.02 KB	0755	2026-07-16 05:15:22
random.py	File	33.87 KB	0644	2026-06-19 12:46:00
reprlib.py	File	6.42 KB	0644	2026-06-19 12:46:00
rlcompleter.py	File	7.64 KB	0644	2026-06-19 12:46:00
runpy.py	File	12.6 KB	0644	2026-06-19 12:46:00
sched.py	File	6.2 KB	0644	2026-06-19 12:46:00
secrets.py	File	1.94 KB	0644	2026-06-19 12:46:00
selectors.py	File	19.21 KB	0644	2026-06-19 12:46:00
shelve.py	File	8.36 KB	0644	2026-06-19 12:46:00
shlex.py	File	13.04 KB	0644	2026-06-19 12:46:00
shutil.py	File	56.76 KB	0644	2026-06-19 12:46:00
signal.py	File	2.44 KB	0644	2026-06-19 12:46:00
site.py	File	23.34 KB	0644	2026-06-19 12:46:00
smtplib.py	File	42.51 KB	0755	2026-07-16 05:15:22
sndhdr.py	File	7.27 KB	0644	2026-06-19 12:46:00
socket.py	File	36.53 KB	0644	2026-06-19 12:46:00
socketserver.py	File	27.2 KB	0644	2026-06-19 12:46:00
sre_compile.py	File	231 B	0644	2026-06-19 12:46:00
sre_constants.py	File	232 B	0644	2026-06-19 12:46:00
sre_parse.py	File	229 B	0644	2026-06-19 12:46:00
ssl.py	File	49.63 KB	0644	2026-06-19 12:46:00
stat.py	File	5.36 KB	0644	2026-06-19 12:46:00
statistics.py	File	49.05 KB	0644	2026-06-19 12:46:00
string.py	File	11.51 KB	0644	2026-06-19 12:46:00
stringprep.py	File	12.61 KB	0644	2026-06-19 12:46:00
struct.py	File	257 B	0644	2026-06-19 12:46:00
subprocess.py	File	86.65 KB	0644	2026-06-19 12:46:00
sunau.py	File	18.04 KB	0644	2026-06-19 12:46:00
symtable.py	File	10.5 KB	0644	2026-06-19 12:46:00
sysconfig.py	File	32 KB	0644	2026-06-19 12:46:00
tabnanny.py	File	11.26 KB	0755	2026-07-16 05:15:22
tarfile.py	File	111.18 KB	0755	2026-07-16 05:15:22
telnetlib.py	File	22.75 KB	0644	2026-06-19 12:46:00
tempfile.py	File	36.46 KB	0644	2026-06-19 12:46:00
textwrap.py	File	19.26 KB	0644	2026-06-19 12:46:00
this.py	File	1003 B	0644	2026-06-19 12:46:00
threading.py	File	58.71 KB	0644	2026-06-19 12:46:00
timeit.py	File	13.15 KB	0755	2026-07-16 05:15:22
token.py	File	2.42 KB	0644	2026-06-19 12:46:00
tokenize.py	File	20.72 KB	0644	2026-06-19 12:46:00
trace.py	File	28.5 KB	0755	2026-07-16 05:15:22
traceback.py	File	45.24 KB	0644	2026-06-19 12:46:00
tracemalloc.py	File	17.62 KB	0644	2026-06-19 12:46:00
tty.py	File	1.99 KB	0644	2026-06-19 12:46:00
turtle.py	File	142.93 KB	0644	2026-06-19 12:46:00
types.py	File	10.74 KB	0644	2026-06-19 12:46:00
typing.py	File	114.68 KB	0644	2026-06-19 12:46:00
uu.py	File	7.19 KB	0755	2026-07-16 05:15:22
uuid.py	File	28.96 KB	0644	2026-06-19 12:46:00
warnings.py	File	21.25 KB	0644	2026-06-19 12:46:00
wave.py	File	22.24 KB	0644	2026-06-19 12:46:00
weakref.py	File	21.01 KB	0644	2026-06-19 12:46:00
webbrowser.py	File	23.56 KB	0755	2026-07-16 05:15:22
xdrlib.py	File	5.8 KB	0644	2026-06-19 12:46:00
zipapp.py	File	7.37 KB	0644	2026-06-19 12:46:00
zipimport.py	File	27.47 KB	0644	2026-06-19 12:46:00

r"""OS routines for NT or Posix depending on what system we're on.

This exports:
  - all functions from posix or nt, e.g. unlink, stat, etc.
  - os.path is either posixpath or ntpath
  - os.name is either 'posix' or 'nt'
  - os.curdir is a string representing the current directory (always '.')
  - os.pardir is a string representing the parent directory (always '..')
  - os.sep is the (or a most common) pathname separator ('/' or '\\')
  - os.extsep is the extension separator (always '.')
  - os.altsep is the alternate pathname separator (None or '/')
  - os.pathsep is the component separator used in $PATH etc
  - os.linesep is the line separator in text files ('\r' or '\n' or '\r\n')
  - os.defpath is the default search path for executables
  - os.devnull is the file path of the null device ('/dev/null', etc.)

Programs that import and use 'os' stand a better chance of being
portable between different platforms.  Of course, they must then
only use functions that are defined by all platforms (e.g., unlink
and opendir), and leave all pathname manipulation to os.path
(e.g., split and join).
"""

#'
import abc
import sys
import stat as st

from _collections_abc import _check_methods

GenericAlias = type(list[int])

_names = sys.builtin_module_names

# Note:  more names are added to __all__ later.
__all__ = ["altsep", "curdir", "pardir", "sep", "pathsep", "linesep",
           "defpath", "name", "path", "devnull", "SEEK_SET", "SEEK_CUR",
           "SEEK_END", "fsencode", "fsdecode", "get_exec_path", "fdopen",
           "extsep"]

def _exists(name):
    return name in globals()

def _get_exports_list(module):
    try:
        return list(module.__all__)
    except AttributeError:
        return [n for n in dir(module) if n[0] != '_']

# Any new dependencies of the os module and/or changes in path separator
# requires updating importlib as well.
if 'posix' in _names:
    name = 'posix'
    linesep = '\n'
    from posix import *
    try:
        from posix import _exit
        __all__.append('_exit')
    except ImportError:
        pass
    import posixpath as path

try:
        from posix import _have_functions
    except ImportError:
        pass

import posix
    __all__.extend(_get_exports_list(posix))
    del posix

elif 'nt' in _names:
    name = 'nt'
    linesep = '\r\n'
    from nt import *
    try:
        from nt import _exit
        __all__.append('_exit')
    except ImportError:
        pass
    import ntpath as path

import nt
    __all__.extend(_get_exports_list(nt))
    del nt

try:
        from nt import _have_functions
    except ImportError:
        pass

else:
    raise ImportError('no os specific module found')

sys.modules['os.path'] = path
from os.path import (curdir, pardir, sep, pathsep, defpath, extsep, altsep,
    devnull)

del _names

if _exists("_have_functions"):
    _globals = globals()
    def _add(str, fn):
        if (fn in _globals) and (str in _have_functions):
            _set.add(_globals[fn])

_set = set()
    _add("HAVE_FACCESSAT",  "access")
    _add("HAVE_FCHMODAT",   "chmod")
    _add("HAVE_FCHOWNAT",   "chown")
    _add("HAVE_FSTATAT",    "stat")
    _add("HAVE_FUTIMESAT",  "utime")
    _add("HAVE_LINKAT",     "link")
    _add("HAVE_MKDIRAT",    "mkdir")
    _add("HAVE_MKFIFOAT",   "mkfifo")
    _add("HAVE_MKNODAT",    "mknod")
    _add("HAVE_OPENAT",     "open")
    _add("HAVE_READLINKAT", "readlink")
    _add("HAVE_RENAMEAT",   "rename")
    _add("HAVE_SYMLINKAT",  "symlink")
    _add("HAVE_UNLINKAT",   "unlink")
    _add("HAVE_UNLINKAT",   "rmdir")
    _add("HAVE_UTIMENSAT",  "utime")
    supports_dir_fd = _set

_set = set()
    _add("HAVE_FACCESSAT",  "access")
    supports_effective_ids = _set

_set = set()
    _add("HAVE_FCHDIR",     "chdir")
    _add("HAVE_FCHMOD",     "chmod")
    _add("HAVE_FCHOWN",     "chown")
    _add("HAVE_FDOPENDIR",  "listdir")
    _add("HAVE_FDOPENDIR",  "scandir")
    _add("HAVE_FEXECVE",    "execve")
    _set.add(stat) # fstat always works
    _add("HAVE_FTRUNCATE",  "truncate")
    _add("HAVE_FUTIMENS",   "utime")
    _add("HAVE_FUTIMES",    "utime")
    _add("HAVE_FPATHCONF",  "pathconf")
    if _exists("statvfs") and _exists("fstatvfs"): # mac os x10.3
        _add("HAVE_FSTATVFS", "statvfs")
    supports_fd = _set

_set = set()
    _add("HAVE_FACCESSAT",  "access")
    # Some platforms don't support lchmod().  Often the function exists
    # anyway, as a stub that always returns ENOSUP or perhaps EOPNOTSUPP.
    # (No, I don't know why that's a good design.)  ./configure will detect
    # this and reject it--so HAVE_LCHMOD still won't be defined on such
    # platforms.  This is Very Helpful.
    #
    # However, sometimes platforms without a working lchmod() *do* have
    # fchmodat().  (Examples: Linux kernel 3.2 with glibc 2.15,
    # OpenIndiana 3.x.)  And fchmodat() has a flag that theoretically makes
    # it behave like lchmod().  So in theory it would be a suitable
    # replacement for lchmod().  But when lchmod() doesn't work, fchmodat()'s
    # flag doesn't work *either*.  Sadly ./configure isn't sophisticated
    # enough to detect this condition--it only determines whether or not
    # fchmodat() minimally works.
    #
    # Therefore we simply ignore fchmodat() when deciding whether or not
    # os.chmod supports follow_symlinks.  Just checking lchmod() is
    # sufficient.  After all--if you have a working fchmodat(), your
    # lchmod() almost certainly works too.
    #
    # _add("HAVE_FCHMODAT",   "chmod")
    _add("HAVE_FCHOWNAT",   "chown")
    _add("HAVE_FSTATAT",    "stat")
    _add("HAVE_LCHFLAGS",   "chflags")
    _add("HAVE_LCHMOD",     "chmod")
    if _exists("lchown"): # mac os x10.3
        _add("HAVE_LCHOWN", "chown")
    _add("HAVE_LINKAT",     "link")
    _add("HAVE_LUTIMES",    "utime")
    _add("HAVE_LSTAT",      "stat")
    _add("HAVE_FSTATAT",    "stat")
    _add("HAVE_UTIMENSAT",  "utime")
    _add("MS_WINDOWS",      "stat")
    supports_follow_symlinks = _set

del _set
    del _have_functions
    del _globals
    del _add

# Python uses fixed values for the SEEK_ constants; they are mapped
# to native constants if necessary in posixmodule.c
# Other possible SEEK values are directly imported from posixmodule.c
SEEK_SET = 0
SEEK_CUR = 1
SEEK_END = 2

# Super directory utilities.
# (Inspired by Eric Raymond; the doc strings are mostly his)

def makedirs(name, mode=0o777, exist_ok=False):
    """makedirs(name [, mode=0o777][, exist_ok=False])

Super-mkdir; create a leaf directory and all intermediate ones.  Works like
    mkdir, except that any intermediate path segment (not just the rightmost)
    will be created if it does not exist. If the target directory already
    exists, raise an OSError if exist_ok is False. Otherwise no exception is
    raised.  This is recursive.

"""
    head, tail = path.split(name)
    if not tail:
        head, tail = path.split(head)
    if head and tail and not path.exists(head):
        try:
            makedirs(head, exist_ok=exist_ok)
        except FileExistsError:
            # Defeats race condition when another thread created the path
            pass
        cdir = curdir
        if isinstance(tail, bytes):
            cdir = bytes(curdir, 'ASCII')
        if tail == cdir:           # xxx/newdir/. exists if xxx/newdir exists
            return
    try:
        mkdir(name, mode)
    except OSError:
        # Cannot rely on checking for EEXIST, since the operating system
        # could give priority to other errors like EACCES or EROFS
        if not exist_ok or not path.isdir(name):
            raise

def removedirs(name):
    """removedirs(name)

Super-rmdir; remove a leaf directory and all empty intermediate
    ones.  Works like rmdir except that, if the leaf directory is
    successfully removed, directories corresponding to rightmost path
    segments will be pruned away until either the whole path is
    consumed or an error occurs.  Errors during this latter phase are
    ignored -- they generally mean that a directory was not empty.

"""
    rmdir(name)
    head, tail = path.split(name)
    if not tail:
        head, tail = path.split(head)
    while head and tail:
        try:
            rmdir(head)
        except OSError:
            break
        head, tail = path.split(head)

def renames(old, new):
    """renames(old, new)

Super-rename; create directories as necessary and delete any left
    empty.  Works like rename, except creation of any intermediate
    directories needed to make the new pathname good is attempted
    first.  After the rename, directories corresponding to rightmost
    path segments of the old name will be pruned until either the
    whole path is consumed or a nonempty directory is found.

Note: this function can fail with the new directory structure made
    if you lack permissions needed to unlink the leaf directory or
    file.

"""
    head, tail = path.split(new)
    if head and tail and not path.exists(head):
        makedirs(head)
    rename(old, new)
    head, tail = path.split(old)
    if head and tail:
        try:
            removedirs(head)
        except OSError:
            pass

__all__.extend(["makedirs", "removedirs", "renames"])

def walk(top, topdown=True, onerror=None, followlinks=False):
    """Directory tree generator.

For each directory in the directory tree rooted at top (including top
    itself, but excluding '.' and '..'), yields a 3-tuple

dirpath, dirnames, filenames

dirpath is a string, the path to the directory.  dirnames is a list of
    the names of the subdirectories in dirpath (including symlinks to directories,
    and excluding '.' and '..').
    filenames is a list of the names of the non-directory files in dirpath.
    Note that the names in the lists are just names, with no path components.
    To get a full path (which begins with top) to a file or directory in
    dirpath, do os.path.join(dirpath, name).

If optional arg 'topdown' is true or not specified, the triple for a
    directory is generated before the triples for any of its subdirectories
    (directories are generated top down).  If topdown is false, the triple
    for a directory is generated after the triples for all of its
    subdirectories (directories are generated bottom up).

When topdown is true, the caller can modify the dirnames list in-place
    (e.g., via del or slice assignment), and walk will only recurse into the
    subdirectories whose names remain in dirnames; this can be used to prune the
    search, or to impose a specific order of visiting.  Modifying dirnames when
    topdown is false has no effect on the behavior of os.walk(), since the
    directories in dirnames have already been generated by the time dirnames
    itself is generated. No matter the value of topdown, the list of
    subdirectories is retrieved before the tuples for the directory and its
    subdirectories are generated.

By default errors from the os.scandir() call are ignored.  If
    optional arg 'onerror' is specified, it should be a function; it
    will be called with one argument, an OSError instance.  It can
    report the error to continue with the walk, or raise the exception
    to abort the walk.  Note that the filename is available as the
    filename attribute of the exception object.

By default, os.walk does not follow symbolic links to subdirectories on
    systems that support them.  In order to get this functionality, set the
    optional argument 'followlinks' to true.

Caution:  if you pass a relative pathname for top, don't change the
    current working directory between resumptions of walk.  walk never
    changes the current directory, and assumes that the client doesn't
    either.

Example:

import os
    from os.path import join, getsize
    for root, dirs, files in os.walk('python/Lib/email'):
        print(root, "consumes ")
        print(sum(getsize(join(root, name)) for name in files), end=" ")
        print("bytes in", len(files), "non-directory files")
        if 'CVS' in dirs:
            dirs.remove('CVS')  # don't visit CVS directories

"""
    sys.audit("os.walk", top, topdown, onerror, followlinks)

stack = [fspath(top)]
    islink, join = path.islink, path.join
    while stack:
        top = stack.pop()
        if isinstance(top, tuple):
            yield top
            continue

dirs = []
        nondirs = []
        walk_dirs = []

# We may not have read permission for top, in which case we can't
        # get a list of the files the directory contains.
        # We suppress the exception here, rather than blow up for a
        # minor reason when (say) a thousand readable directories are still
        # left to visit.
        try:
            scandir_it = scandir(top)
        except OSError as error:
            if onerror is not None:
                onerror(error)
            continue

cont = False
        with scandir_it:
            while True:
                try:
                    try:
                        entry = next(scandir_it)
                    except StopIteration:
                        break
                except OSError as error:
                    if onerror is not None:
                        onerror(error)
                    cont = True
                    break

try:
                    is_dir = entry.is_dir()
                except OSError:
                    # If is_dir() raises an OSError, consider the entry not to
                    # be a directory, same behaviour as os.path.isdir().
                    is_dir = False

if is_dir:
                    dirs.append(entry.name)
                else:
                    nondirs.append(entry.name)

if not topdown and is_dir:
                    # Bottom-up: traverse into sub-directory, but exclude
                    # symlinks to directories if followlinks is False
                    if followlinks:
                        walk_into = True
                    else:
                        try:
                            is_symlink = entry.is_symlink()
                        except OSError:
                            # If is_symlink() raises an OSError, consider the
                            # entry not to be a symbolic link, same behaviour
                            # as os.path.islink().
                            is_symlink = False
                        walk_into = not is_symlink

if walk_into:
                        walk_dirs.append(entry.path)
        if cont:
            continue

if topdown:
            # Yield before sub-directory traversal if going top down
            yield top, dirs, nondirs
            # Traverse into sub-directories
            for dirname in reversed(dirs):
                new_path = join(top, dirname)
                # bpo-23605: os.path.islink() is used instead of caching
                # entry.is_symlink() result during the loop on os.scandir() because
                # the caller can replace the directory entry during the "yield"
                # above.
                if followlinks or not islink(new_path):
                    stack.append(new_path)
        else:
            # Yield after sub-directory traversal if going bottom up
            stack.append((top, dirs, nondirs))
            # Traverse into sub-directories
            for new_path in reversed(walk_dirs):
                stack.append(new_path)

__all__.append("walk")

if {open, stat} <= supports_dir_fd and {scandir, stat} <= supports_fd:

def fwalk(top=".", topdown=True, onerror=None, *, follow_symlinks=False, dir_fd=None):
        """Directory tree generator.

This behaves exactly like walk(), except that it yields a 4-tuple

dirpath, dirnames, filenames, dirfd

`dirpath`, `dirnames` and `filenames` are identical to walk() output,
        and `dirfd` is a file descriptor referring to the directory `dirpath`.

The advantage of fwalk() over walk() is that it's safe against symlink
        races (when follow_symlinks is False).

If dir_fd is not None, it should be a file descriptor open to a directory,
          and top should be relative; top will then be relative to that directory.
          (dir_fd is always supported for fwalk.)

Caution:
        Since fwalk() yields file descriptors, those are only valid until the
        next iteration step, so you should dup() them if you want to keep them
        for a longer period.

Example:

import os
        for root, dirs, files, rootfd in os.fwalk('python/Lib/email'):
            print(root, "consumes", end="")
            print(sum(os.stat(name, dir_fd=rootfd).st_size for name in files),
                  end="")
            print("bytes in", len(files), "non-directory files")
            if 'CVS' in dirs:
                dirs.remove('CVS')  # don't visit CVS directories
        """
        sys.audit("os.fwalk", top, topdown, onerror, follow_symlinks, dir_fd)
        top = fspath(top)
        # Note: To guard against symlink races, we use the standard
        # lstat()/open()/fstat() trick.
        if not follow_symlinks:
            orig_st = stat(top, follow_symlinks=False, dir_fd=dir_fd)
        topfd = open(top, O_RDONLY | O_NONBLOCK, dir_fd=dir_fd)
        try:
            if (follow_symlinks or (st.S_ISDIR(orig_st.st_mode) and
                                    path.samestat(orig_st, stat(topfd)))):
                yield from _fwalk(topfd, top, isinstance(top, bytes),
                                  topdown, onerror, follow_symlinks)
        finally:
            close(topfd)

def _fwalk(topfd, toppath, isbytes, topdown, onerror, follow_symlinks):
        # Note: This uses O(depth of the directory tree) file descriptors: if
        # necessary, it can be adapted to only require O(1) FDs, see issue
        # #13734.

scandir_it = scandir(topfd)
        dirs = []
        nondirs = []
        entries = None if topdown or follow_symlinks else []
        for entry in scandir_it:
            name = entry.name
            if isbytes:
                name = fsencode(name)
            try:
                if entry.is_dir():
                    dirs.append(name)
                    if entries is not None:
                        entries.append(entry)
                else:
                    nondirs.append(name)
            except OSError:
                try:
                    # Add dangling symlinks, ignore disappeared files
                    if entry.is_symlink():
                        nondirs.append(name)
                except OSError:
                    pass

if topdown:
            yield toppath, dirs, nondirs, topfd

for name in dirs if entries is None else zip(dirs, entries):
            try:
                if not follow_symlinks:
                    if topdown:
                        orig_st = stat(name, dir_fd=topfd, follow_symlinks=False)
                    else:
                        assert entries is not None
                        name, entry = name
                        orig_st = entry.stat(follow_symlinks=False)
                dirfd = open(name, O_RDONLY | O_NONBLOCK, dir_fd=topfd)
            except OSError as err:
                if onerror is not None:
                    onerror(err)
                continue
            try:
                if follow_symlinks or path.samestat(orig_st, stat(dirfd)):
                    dirpath = path.join(toppath, name)
                    yield from _fwalk(dirfd, dirpath, isbytes,
                                      topdown, onerror, follow_symlinks)
            finally:
                close(dirfd)

if not topdown:
            yield toppath, dirs, nondirs, topfd

__all__.append("fwalk")

def execl(file, *args):
    """execl(file, *args)

Execute the executable file with argument list args, replacing the
    current process. """
    execv(file, args)

def execle(file, *args):
    """execle(file, *args, env)

Execute the executable file with argument list args and
    environment env, replacing the current process. """
    env = args[-1]
    execve(file, args[:-1], env)

def execlp(file, *args):
    """execlp(file, *args)

Execute the executable file (which is searched for along $PATH)
    with argument list args, replacing the current process. """
    execvp(file, args)

def execlpe(file, *args):
    """execlpe(file, *args, env)

Execute the executable file (which is searched for along $PATH)
    with argument list args and environment env, replacing the current
    process. """
    env = args[-1]
    execvpe(file, args[:-1], env)

def execvp(file, args):
    """execvp(file, args)

Execute the executable file (which is searched for along $PATH)
    with argument list args, replacing the current process.
    args may be a list or tuple of strings. """
    _execvpe(file, args)

def execvpe(file, args, env):
    """execvpe(file, args, env)

Execute the executable file (which is searched for along $PATH)
    with argument list args and environment env, replacing the
    current process.
    args may be a list or tuple of strings. """
    _execvpe(file, args, env)

__all__.extend(["execl","execle","execlp","execlpe","execvp","execvpe"])

def _execvpe(file, args, env=None):
    if env is not None:
        exec_func = execve
        argrest = (args, env)
    else:
        exec_func = execv
        argrest = (args,)
        env = environ

if path.dirname(file):
        exec_func(file, *argrest)
        return
    saved_exc = None
    path_list = get_exec_path(env)
    if name != 'nt':
        file = fsencode(file)
        path_list = map(fsencode, path_list)
    for dir in path_list:
        fullname = path.join(dir, file)
        try:
            exec_func(fullname, *argrest)
        except (FileNotFoundError, NotADirectoryError) as e:
            last_exc = e
        except OSError as e:
            last_exc = e
            if saved_exc is None:
                saved_exc = e
    if saved_exc is not None:
        raise saved_exc
    raise last_exc

def get_exec_path(env=None):
    """Returns the sequence of directories that will be searched for the
    named executable (similar to a shell) when launching a process.

*env* must be an environment variable dict or None.  If *env* is None,
    os.environ will be used.
    """
    # Use a local import instead of a global import to limit the number of
    # modules loaded at startup: the os module is always loaded at startup by
    # Python. It may also avoid a bootstrap issue.
    import warnings

if env is None:
        env = environ

# {b'PATH': ...}.get('PATH') and {'PATH': ...}.get(b'PATH') emit a
    # BytesWarning when using python -b or python -bb: ignore the warning
    with warnings.catch_warnings():
        warnings.simplefilter("ignore", BytesWarning)

try:
            path_list = env.get('PATH')
        except TypeError:
            path_list = None

if supports_bytes_environ:
            try:
                path_listb = env[b'PATH']
            except (KeyError, TypeError):
                pass
            else:
                if path_list is not None:
                    raise ValueError(
                        "env cannot contain 'PATH' and b'PATH' keys")
                path_list = path_listb

if path_list is not None and isinstance(path_list, bytes):
                path_list = fsdecode(path_list)

if path_list is None:
        path_list = defpath
    return path_list.split(pathsep)

# Change environ to automatically call putenv() and unsetenv()
from _collections_abc import MutableMapping, Mapping

class _Environ(MutableMapping):
    def __init__(self, data, encodekey, decodekey, encodevalue, decodevalue):
        self.encodekey = encodekey
        self.decodekey = decodekey
        self.encodevalue = encodevalue
        self.decodevalue = decodevalue
        self._data = data

def __getitem__(self, key):
        try:
            value = self._data[self.encodekey(key)]
        except KeyError:
            # raise KeyError with the original key value
            raise KeyError(key) from None
        return self.decodevalue(value)

def __setitem__(self, key, value):
        key = self.encodekey(key)
        value = self.encodevalue(value)
        putenv(key, value)
        self._data[key] = value

def __delitem__(self, key):
        encodedkey = self.encodekey(key)
        unsetenv(encodedkey)
        try:
            del self._data[encodedkey]
        except KeyError:
            # raise KeyError with the original key value
            raise KeyError(key) from None

def __iter__(self):
        # list() from dict object is an atomic operation
        keys = list(self._data)
        for key in keys:
            yield self.decodekey(key)

def __len__(self):
        return len(self._data)

def __repr__(self):
        formatted_items = ", ".join(
            f"{self.decodekey(key)!r}: {self.decodevalue(value)!r}"
            for key, value in self._data.items()
        )
        return f"environ({{{formatted_items}}})"

def copy(self):
        return dict(self)

def setdefault(self, key, value):
        if key not in self:
            self[key] = value
        return self[key]

def __ior__(self, other):
        self.update(other)
        return self

def __or__(self, other):
        if not isinstance(other, Mapping):
            return NotImplemented
        new = dict(self)
        new.update(other)
        return new

def __ror__(self, other):
        if not isinstance(other, Mapping):
            return NotImplemented
        new = dict(other)
        new.update(self)
        return new

def _createenviron():
    if name == 'nt':
        # Where Env Var Names Must Be UPPERCASE
        def check_str(value):
            if not isinstance(value, str):
                raise TypeError("str expected, not %s" % type(value).__name__)
            return value
        encode = check_str
        decode = str
        def encodekey(key):
            return encode(key).upper()
        data = {}
        for key, value in environ.items():
            data[encodekey(key)] = value
    else:
        # Where Env Var Names Can Be Mixed Case
        encoding = sys.getfilesystemencoding()
        def encode(value):
            if not isinstance(value, str):
                raise TypeError("str expected, not %s" % type(value).__name__)
            return value.encode(encoding, 'surrogateescape')
        def decode(value):
            return value.decode(encoding, 'surrogateescape')
        encodekey = encode
        data = environ
    return _Environ(data,
        encodekey, decode,
        encode, decode)

# unicode environ
environ = _createenviron()
del _createenviron

def getenv(key, default=None):
    """Get an environment variable, return None if it doesn't exist.
    The optional second argument can specify an alternate default.
    key, default and the result are str."""
    return environ.get(key, default)

supports_bytes_environ = (name != 'nt')
__all__.extend(("getenv", "supports_bytes_environ"))

if supports_bytes_environ:
    def _check_bytes(value):
        if not isinstance(value, bytes):
            raise TypeError("bytes expected, not %s" % type(value).__name__)
        return value

# bytes environ
    environb = _Environ(environ._data,
        _check_bytes, bytes,
        _check_bytes, bytes)
    del _check_bytes

def getenvb(key, default=None):
        """Get an environment variable, return None if it doesn't exist.
        The optional second argument can specify an alternate default.
        key, default and the result are bytes."""
        return environb.get(key, default)

__all__.extend(("environb", "getenvb"))

def _fscodec():
    encoding = sys.getfilesystemencoding()
    errors = sys.getfilesystemencodeerrors()

def fsencode(filename):
        """Encode filename (an os.PathLike, bytes, or str) to the filesystem
        encoding with 'surrogateescape' error handler, return bytes unchanged.
        On Windows, use 'strict' error handler if the file system encoding is
        'mbcs' (which is the default encoding).
        """
        filename = fspath(filename)  # Does type-checking of `filename`.
        if isinstance(filename, str):
            return filename.encode(encoding, errors)
        else:
            return filename

def fsdecode(filename):
        """Decode filename (an os.PathLike, bytes, or str) from the filesystem
        encoding with 'surrogateescape' error handler, return str unchanged. On
        Windows, use 'strict' error handler if the file system encoding is
        'mbcs' (which is the default encoding).
        """
        filename = fspath(filename)  # Does type-checking of `filename`.
        if isinstance(filename, bytes):
            return filename.decode(encoding, errors)
        else:
            return filename

return fsencode, fsdecode

fsencode, fsdecode = _fscodec()
del _fscodec

# Supply spawn*() (probably only for Unix)
if _exists("fork") and not _exists("spawnv") and _exists("execv"):

P_WAIT = 0
    P_NOWAIT = P_NOWAITO = 1

__all__.extend(["P_WAIT", "P_NOWAIT", "P_NOWAITO"])

# XXX Should we support P_DETACH?  I suppose it could fork()**2
    # and close the std I/O streams.  Also, P_OVERLAY is the same
    # as execv*()?

def _spawnvef(mode, file, args, env, func):
        # Internal helper; func is the exec*() function to use
        if not isinstance(args, (tuple, list)):
            raise TypeError('argv must be a tuple or a list')
        if not args or not args[0]:
            raise ValueError('argv first element cannot be empty')
        pid = fork()
        if not pid:
            # Child
            try:
                if env is None:
                    func(file, args)
                else:
                    func(file, args, env)
            except:
                _exit(127)
        else:
            # Parent
            if mode == P_NOWAIT:
                return pid # Caller is responsible for waiting!
            while 1:
                wpid, sts = waitpid(pid, 0)
                if WIFSTOPPED(sts):
                    continue

return waitstatus_to_exitcode(sts)

def spawnv(mode, file, args):
        """spawnv(mode, file, args) -> integer

Execute file with arguments from args in a subprocess.
If mode == P_NOWAIT return the pid of the process.
If mode == P_WAIT return the process's exit code if it exits normally;
otherwise return -SIG, where SIG is the signal that killed it. """
        return _spawnvef(mode, file, args, None, execv)

def spawnve(mode, file, args, env):
        """spawnve(mode, file, args, env) -> integer

Execute file with arguments from args in a subprocess with the
specified environment.
If mode == P_NOWAIT return the pid of the process.
If mode == P_WAIT return the process's exit code if it exits normally;
otherwise return -SIG, where SIG is the signal that killed it. """
        return _spawnvef(mode, file, args, env, execve)

# Note: spawnvp[e] isn't currently supported on Windows

def spawnvp(mode, file, args):
        """spawnvp(mode, file, args) -> integer

Execute file (which is looked for along $PATH) with arguments from
args in a subprocess.
If mode == P_NOWAIT return the pid of the process.
If mode == P_WAIT return the process's exit code if it exits normally;
otherwise return -SIG, where SIG is the signal that killed it. """
        return _spawnvef(mode, file, args, None, execvp)

def spawnvpe(mode, file, args, env):
        """spawnvpe(mode, file, args, env) -> integer

Execute file (which is looked for along $PATH) with arguments from
args in a subprocess with the supplied environment.
If mode == P_NOWAIT return the pid of the process.
If mode == P_WAIT return the process's exit code if it exits normally;
otherwise return -SIG, where SIG is the signal that killed it. """
        return _spawnvef(mode, file, args, env, execvpe)

__all__.extend(["spawnv", "spawnve", "spawnvp", "spawnvpe"])

if _exists("spawnv"):
    # These aren't supplied by the basic Windows code
    # but can be easily implemented in Python

def spawnl(mode, file, *args):
        """spawnl(mode, file, *args) -> integer

def spawnle(mode, file, *args):
        """spawnle(mode, file, *args, env) -> integer

Execute file with arguments from args in a subprocess with the
supplied environment.
If mode == P_NOWAIT return the pid of the process.
If mode == P_WAIT return the process's exit code if it exits normally;
otherwise return -SIG, where SIG is the signal that killed it. """
        env = args[-1]
        return spawnve(mode, file, args[:-1], env)

__all__.extend(["spawnl", "spawnle"])

if _exists("spawnvp"):
    # At the moment, Windows doesn't implement spawnvp[e],
    # so it won't have spawnlp[e] either.
    def spawnlp(mode, file, *args):
        """spawnlp(mode, file, *args) -> integer

def spawnlpe(mode, file, *args):
        """spawnlpe(mode, file, *args, env) -> integer

__all__.extend(["spawnlp", "spawnlpe"])

# VxWorks has no user space shell provided. As a result, running
# command in a shell can't be supported.
if sys.platform != 'vxworks':
    # Supply os.popen()
    def popen(cmd, mode="r", buffering=-1):
        if not isinstance(cmd, str):
            raise TypeError("invalid cmd type (%s, expected string)" % type(cmd))
        if mode not in ("r", "w"):
            raise ValueError("invalid mode %r" % mode)
        if buffering == 0 or buffering is None:
            raise ValueError("popen() does not support unbuffered streams")
        import subprocess
        if mode == "r":
            proc = subprocess.Popen(cmd,
                                    shell=True, text=True,
                                    stdout=subprocess.PIPE,
                                    bufsize=buffering)
            return _wrap_close(proc.stdout, proc)
        else:
            proc = subprocess.Popen(cmd,
                                    shell=True, text=True,
                                    stdin=subprocess.PIPE,
                                    bufsize=buffering)
            return _wrap_close(proc.stdin, proc)

# Helper for popen() -- a proxy for a file whose close waits for the process
    class _wrap_close:
        def __init__(self, stream, proc):
            self._stream = stream
            self._proc = proc
        def close(self):
            self._stream.close()
            returncode = self._proc.wait()
            if returncode == 0:
                return None
            if name == 'nt':
                return returncode
            else:
                return returncode << 8  # Shift left to match old behavior
        def __enter__(self):
            return self
        def __exit__(self, *args):
            self.close()
        def __getattr__(self, name):
            return getattr(self._stream, name)
        def __iter__(self):
            return iter(self._stream)

__all__.append("popen")

# Supply os.fdopen()
def fdopen(fd, mode="r", buffering=-1, encoding=None, *args, **kwargs):
    if not isinstance(fd, int):
        raise TypeError("invalid fd type (%s, expected integer)" % type(fd))
    import io
    if "b" not in mode:
        encoding = io.text_encoding(encoding)
    return io.open(fd, mode, buffering, encoding, *args, **kwargs)

# For testing purposes, make sure the function is available when the C
# implementation exists.
def _fspath(path):
    """Return the path representation of a path-like object.

If str or bytes is passed in, it is returned unchanged. Otherwise the
    os.PathLike interface is used to get the path representation. If the
    path representation is not str or bytes, TypeError is raised. If the
    provided path is not str, bytes, or os.PathLike, TypeError is raised.
    """
    if isinstance(path, (str, bytes)):
        return path

# Work from the object's type to match method resolution of other magic
    # methods.
    path_type = type(path)
    try:
        path_repr = path_type.__fspath__(path)
    except AttributeError:
        if hasattr(path_type, '__fspath__'):
            raise
        else:
            raise TypeError("expected str, bytes or os.PathLike object, "
                            "not " + path_type.__name__)
    if isinstance(path_repr, (str, bytes)):
        return path_repr
    else:
        raise TypeError("expected {}.__fspath__() to return str or bytes, "
                        "not {}".format(path_type.__name__,
                                        type(path_repr).__name__))

# If there is no C implementation, make the pure Python version the
# implementation as transparently as possible.
if not _exists('fspath'):
    fspath = _fspath
    fspath.__name__ = "fspath"

class PathLike(abc.ABC):

"""Abstract base class for implementing the file system path protocol."""

@abc.abstractmethod
    def __fspath__(self):
        """Return the file system path representation of the object."""
        raise NotImplementedError

@classmethod
    def __subclasshook__(cls, subclass):
        if cls is PathLike:
            return _check_methods(subclass, '__fspath__')
        return NotImplemented

__class_getitem__ = classmethod(GenericAlias)

if name == 'nt':
    class _AddedDllDirectory:
        def __init__(self, path, cookie, remove_dll_directory):
            self.path = path
            self._cookie = cookie
            self._remove_dll_directory = remove_dll_directory
        def close(self):
            self._remove_dll_directory(self._cookie)
            self.path = None
        def __enter__(self):
            return self
        def __exit__(self, *args):
            self.close()
        def __repr__(self):
            if self.path:
                return "<AddedDllDirectory({!r})>".format(self.path)
            return "<AddedDllDirectory()>"

def add_dll_directory(path):
        """Add a path to the DLL search path.

This search path is used when resolving dependencies for imported
        extension modules (the module itself is resolved through sys.path),
        and also by ctypes.

Remove the directory by calling close() on the returned object or
        using it in a with statement.
        """
        import nt
        cookie = nt._add_dll_directory(path)
        return _AddedDllDirectory(
            path,
            cookie,
            nt._remove_dll_directory
        )

WebShell Manager

Command Execution

File Upload

WebShell Manager

Command Execution

File Upload

Create New Folder

Create New File

Edit File: os.py

Rename

Change Permissions

System Information